 |
| |
“FLOWTECH” Manufactures Industrial Oil Consumption Meter in Two Types.
(1) Oval Gear Type.
(2) Piston Type. |
| DESCRIPTION OVAL GEAR TYPE |
FLOWTECH Oval gear type Positive Displacement Meter are intended for general in line Volumetric Consumption applications for Clean Liquid. The measuring element consists of two oval wheels, driven by the liquid. Each revolution of the oval wheels displaces a precisely known volume of liquid through the meter, from inlet to outlet. The number of revolutions therefore is directly proportional to the measured volume. Transmission gearing transmits the revolutions of the Oval wheels to a mechanical register which counts the flow in volumetric units (Liters, Cubic Meters, and Gallons etc.)
Line sizes 25 mm to 100 mm (1” to 4”) and are suitable for up to 40 Kg/Cm2 Pressure and 180 o C Temp., Viscosities up to 100000 cP, Accuracy : +/- 0.1 to +/- 0.3 % of actual flow.
Accessories : Mechanical Register (Reset type and Non reset type), Electronic Totalizer, Batch Controller, Strainer. |
| DESIGN FEATURES |
- Dowel Pin, side plate construction
- Detachable flow scales
- Externally adjustable packing glands
- Connections can be rotated 360 degree at 90 degree
- Laminated safety glass shielding
- Scale length of 180-200 mm
|
| PERFORMANCE |
Accuracy
|
+/- 2% F.S.D. |
Temperature Ratings
|
Maximum Operating Temperature rating is 121 o C for Gas services and
93 o C for Liquid services. |
Repeatability
|
0.5 % |
Connections
|
Flanged OR Screwed OR Triclover Joint OR Hose Nipple |
Rangebility
|
10:1 |
Enclosure |
IP 55 OR IP 65 on request |
| Scale length |
180-200 mm |
|
| PRESSURE TAPPINGS : - There are three types of Pressure Tappings are used. |
| Meter Size |
Max. Operating Pressure (Kg/Cm2g) |
| 15 |
25 |
| 20 |
25 |
| 25 |
15 |
| 40 |
12 |
| 50 |
10 |
| 80 |
07 |
|
| GASKETS, STUDS, NUTS & JACK SCREW : - For details please refer the Material of Construction section. |
Tube
|
Borosilicate Glass |
Float
|
SS 316, PTFE, others on request |
Packings
|
Neoprene, PTFE, Silicon, Viton |
Frame & Cover
|
M.S. OR SS |
End Fitting
|
M.S., C.S., SS304, SS316, CF-8M, CF8, C.I. PTFE Lined, SS PTFE Lined, PVC, others on request |
Frame & Cover
|
M.S. OR SS |
| |
|
|
 |
|
|
|
