FLOWTECH Magnetically float operated Top Mounted Level Switch are intended for controlling one or multi Levels by using Reed Switch. The Unit Consists of Vertical Guide Pipe (Stem ) , Reed Switches are located, Magnetic Float Sliding over the Stem according to the level in the tank. After passing the float, the reed relay will retain their output state. Various materials of construction are available depending up on Service Condition. Maximum 4 Set points can be given in a Single Level Switch & Maximum stem length will be 3 Meters.
DESIGN FEATURES
Float
S.S.316 or Teflon Coated or PP / PVDF
Process Connection
Screwed OR flanged
Flange
Mini 1” NB to Any Size in C.S. or S.S.304 or S.S.316 or S.S. Lined C.S. Etc
Die Cast Aluminium, Weather Proof IP 65 (Enclosure) (IS – 2147) OR
Flame Proof to II A, II B (IS – 2148 CMRS Dhanbad Approved)
Operating Pressure
10 Kg / Cm2
Operating Temp
Maxi. 1000 C.
Cable Entry
½” NPT (F) OR ¾” ET (F)
No of Switches
As Per Customer Requirement
Stem Length
Up to 5 Meters
SAILENT FEATURES
One Moving Component Exists, so that no – wear of float. The switch operates on the principle of magnetic flux coupling with no mechanical connection so that fluid contamination of switch components can not occur.
Suitable for any fluid having Specific Gravity Above 0.7
Operate in any Position from vertical to an inclined angle of 30o
Minimum possible Distance between 2 Level set Points is 75 mm
INFORMATION REQUIRED TO QUOTE
Material of Construction , Services medium , Specific Gravity , Maxi Pressure & Temperature , Number of Actuating Levels & Their Distance
from top of the Connection, Process Connection .
